Updating bios with cd 36 and dating again
Press and in a few short minutes your bootable USB stick will be ready. Make sure you set your bootable USB stick as your boot device and then press .Take the updated BIOS version and BIOS update utility you downloaded from the manufacturer’s website and copy them to the newly bootable USB stick. Once the prompt appears, you will need to type the exact name of your BIOS update utility or flash tool such as “bupdater” or “afudos” or “awdflash.” If your files and update tool are located within a different folder, such as ours seen in the image above, then you need to first access that folder using the command “cd\.Our files are in “cd\TEST” again noted in the image above.Going forward, each flash utility is a bit different but simple enough to understand.Then type “msinfo32” to bring up your computer’s System Information log.Your current BIOS version will be listed under “BIOS Version/Date”.It will create a bootable USB using MS-DOS or Free DOS depending on your preference.You can also create one from an existing ISO image if you would prefer. This will take you to the Boot Selection where you can set a boot device.
Select your USB stick and follow the onscreen instructions to complete your BIOS update.To update your BIOS via DOS, you will need a bootable USB. We’re using Rufus, but you can use any of the options listed above.Rufus formats your USB into a FAT32 file format by default, targeting UEFI or DOS system types.You can also locate your current BIOS while in Windows.Press Window Key R to access the “RUN” command window.